Hitachi Compute Rack 220H User Manual

4-10 Replacing parts
Hitachi Compute Rack 220H CRU Replacement Guide
Removing a fan
1. Turn off power to the system and peripherals.
See Powering off system unit on page 3-4.
2. Slide out the system from the rack cabinet.
See Sliding out the system unit from a rack cabinet on page 3-5.
3. Remove the front top cover of the system.
See Removing the front top cover on page 3-7.
4. Check which fan slot you need to remove the fan module from.
5. Grasp the fan, press the release latch of fan, and then lift it out of straight
upward.
Figure 4-10: Remove a fan
Release latch

Hitachi Compute Rack 220H Specifications

General

Brand	Hitachi
Model	Compute Rack 220H
Category	Server
Language	English