Replacing parts 4-15
Hitachi Compute Rack 220H CRU Replacement Guide
10. Grasp and slide the air baffle toward the rear side of the system slightly.
11. Lift up and remove the air baffle.
Figure 4-15: Remove the air baffle
12. Check which memory slot you need to remove the DIMM from.
13. Open the lock tabs, and then remove the DIMM from the memory slot.
NOTICE
• Be careful not to tamper with the nearby parts when you remove
the DIMM
, since the working space is narrow.
• Make sure you do not bend the electrolytic capacitors when
opening the lock tabs of a memory slot. Otherwise, the
motherboard may be damaged.
Figure 4-16: Remove a DIMM
Lock tab
Lock tab
To Next Page
Loading...
