20
CP-X2511N(C15I-25N2) / CP-X3011N(C15I-30N2) / CP-X4011N(C15I-40N2) / CP-X2011N(C15-20N2) / ED-X45N(C15-20N2)
Problem Likely Cause Things to Check
USB Display
Can't run "LiveViewer
Lite for USB"
automatically.
CD-ROM autorun is disabled.
Launch "LiveViewer Lite for USB"
from My Computer manually, or
confi gure to enable CD-ROM
autorun.
Screensaver is running. Exit the screensaver.
No Image
Security software is blocking USB
data transfer - especially write data
for USB memory.
Change the security software
setting to allow to use "LiveViewer
Lite for USB".
Others
- Information from the projector
to computer is not correct or
completed
- The projector does not respond
- Image on screen is frozen.
Communication between the
projector and computer is not
working well.
NETWORK Functions of the
projector is not working well.
Try “NETWORK RESTART”
in SERVICE menu under the
NETWORK menu.
To Next Page
Loading...
Need help?
General