19
CP-X2511N(C15I-25N2) / CP-X3011N(C15I-30N2) / CP-X4011N(C15I-40N2) / CP-X2011N(C15-20N2) / ED-X45N(C15-20N2)
Problem Likely Cause Things to Check
Network Presentation
Can't Install LiveViewer
The "LiveViewer" is not work on
Windows Vista without any Service
Pack.
Apply the latest Service Pack to
your PC.
The projected image is
rather slow compared to
that of the computer
The projector isn’t capable of
relaying dynamic images such
as PowerPoint
®
animation at full
speed.
Switching the priority to
‘Transmission Speed’ under the
options menu may help to improve
speed.
The compression rate being used
for transferring the images is too
low.
Switching the priority to
‘Transmission Speed’ under the
options menu may help to improve
speed.
No Image
Using Photo Gallery Slide Show in
Windows Vista.
The “LiveViewer” cannot send
computer screen data while using
Windows Vista Photo Gallery Slide
Show. Please close Photo Gallery
Slide Show before using the
“LiveViewer”.
Using screensaver with password.
The "LiveViewer" cannot send
computer screen data while using
screensaver with password.
Can't display the movies
correctly.
In some combinations of
computer's video card and
application software, there is
a possibility that true image
especially movies played by media
player - cannot be transferred to
the projector with the “LiveViewer”.
If there is a video acceleration
level adjustment function in your
application, please try to adjust it.
Refer your application manual in
detail.
The LiveViewer can't transfer
movie when DFMirage driver was
installed.
Remove DFMirage driver when
you need to display movie with
LiveViewer.
Network connection
between the computer
and projector is
disconnected when
computer display
resolution is changed
during Network
Presentation.
The computer-Projector network
connection might be disconnected
when computer display resolution
is changed while displaying picture.
Please re-connect using
“Connect button” after changing
computer display resolution, or
change display resolution before
connecting with the “LiveViewer”.
Images contain lots of
interference.
The compression rate being used
for transferring the images is too
high.
Try setting the priority to 'Image
Quality' in the “LiveViewer” Option
menu. You may experience a drop
in speed.
Neither transparency
nor translucency effects
(Glass)
Using the “LiveViewer” with
Windows Aero mode.
The “LiveViewer” does not support
these features of Windows Vista
Aero.