117
Troubleshooting
Indicator Status Description
The projector is in a standby state.
Please refer to the section “Power on/off”.
The projector is warming up.
Please wait.
The projector is in an on state.
Ordinary operations may be performed.
The projector is cooling down.
Please wait.
(continued on next page)
Regarding the indicator lamps
The indicators may differ from usual, check and cope with it according to the
following table.
The indicators are described as below.
Lit
Steady light
Blinking Off
Regarding the indicator lamps
Orange
Green
Orange
Green
To Next Page
Loading...
