Hitachi CP-X8800 User Manual

8
Setting up
Setting up
Install the projector according to the environment and manner the projector will be
used in.
For the case of installation in a special state such as ceiling mount, the speci ed
mounting accessories and service may be required. Before installing the projector,
consult your dealer about your installation.
Secure a clearance of 50cm or greater between the exhaust vents and walls, and
a clearance of 30cm or greater between the intake vents and walls. Assume that
there is enough clearance in the front, back, and top of the projector in the  gure
below.
(continued on next page)
50cm or greater
Intake
vents
Exhaust
vents
30cm or greater
Installing the lens unit
See the manual of the optional lens.

Hitachi CP-X8800 Specifications

General

Matrix size	0.79 \
Native aspect ratio	3:4
Projection distance	- m
Projection technology	3LCD
Contrast ratio (typical)	10000:1
Screen size compatibility	- \
Projector native resolution	XGA (1024x768)
Focus	Auto/Manual
Zoom capability	Yes
Focal length range	- mm
Lamp power	430 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	3000 h
Full HD	No
Supported video modes	480i, 480p, 576i, 720p, 1080i, 1080p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
HDMI connector type	Full-size
Serial interface type	RS-232
USB 2.0 ports quantity	1
S-Video inputs quantity	0
Wi-Fi	-
Noise level	37 dB
Noise level (economic mode)	31 dB
RMS rated power	16 W
Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	White
Power source	AC
AC input voltage	110 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	600 W

Weight and Dimensions

Depth	456 mm
Width	498 mm
Height	170 mm
Weight	11100 g