Hitachi CP-X8800 - IMAGE Menu

66
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table for selected port.
Item Description
ASPECT
Using the ▲/▼ buttons switches the mode for aspect ratio.
For a computer signal
CP-X8800:
NORMAL
ó
4:3
ó
16:9
ó
16:10
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750:
NORMAL
ó
4:3
ó
16:9
ó
16:10
ó
NATIVE
For HDMI
TM
, HDBaseT™, and DisplayPort signals
CP-X8800:
NORMAL
ó
4:3
ó
16:9
ó
16:10
ó
14:9
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750:
NORMAL
ó
4:3
ó
16:9
ó
16:10
ó
14:9
ó
NATIVE
For a video signal
CP-X8800:
4:3
ó
16:9
ó
14:9
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750:
4:3
ó
16:9
ó
16:10
ó
14:9
ó
NATIVE
For an SDI signal (CP-WU8700 only)
NORMAL
ó
4:3
ó
16:9
For an input signal from the LAN port, or if there is no signal
CP-X8800: 4:3 (xed)
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750: 16:10 (xed)
• The NORMAL mode keeps the original aspect ratio of the signal.
(continued on next page)