Hitachi CP-X8800 - Selecting an Aspect Ratio

39
Operating
Selecting an aspect ratio
1.
Press ASPECT button on the remote control.
Each time you press the button, the projector switches
the mode for aspect ratio in turn.
ASPECT
button
• ASPECT button does not work when no proper signal is input.
• NORMAL mode keeps the original aspect ratio setting.
NOTE
 For a computer signal
CP-X8800:
NORMAL  4:3  16:9  16:10
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750:
NORMAL  4:3  16:9  16:10  NATIVE
 For a video signal
CP-X8800:
4:3  16:9  14:9
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750:
4:3  16:9  16:10  14:9  NATIVE
 For an input signal from the LAN port, or if there is no signal
CP-X8800: 4:3 (xed)
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750: 16:10 (xed)
 For HDMI
TM
, HDBaseT
TM
, and DisplayPort signals
CP-X8800:
NORMAL  4:3  16:9  16:10  14:9
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750:
NORMAL  4:3  16:9  16:10  14:9  NATIVE
 For an SDI signal (CP-WU8700 only)
NORMAL  4:3  16:9