Hitachi CP-X8800 User Manual

9
Setting up
Secure a clearance of 50cm or greater between the exhaust vents and walls.
Assume that there is enough clearance in the front, sides, and top of the projector
in the gure below.
Setting up (continued)
Secure a clearance of 50cm or greater when installing the projectors side by side.
As for the required clearance not shown in the gure below, follow the installation
mentioned above.
Secure a clearance of 30cm or greater between the intake vents and walls when
installing the projector in portrait mode. As for the required clearance not shown in
the gure below, follow the installation mentioned above.
50cm or greater
Exhaust
vents
50cm or greater
30cm or greater
Intake
vents

Hitachi CP-X8800 Specifications

General

Matrix size	0.79 \
Native aspect ratio	3:4
Projection distance	- m
Projection technology	3LCD
Contrast ratio (typical)	10000:1
Screen size compatibility	- \
Projector native resolution	XGA (1024x768)
Focus	Auto/Manual
Zoom capability	Yes
Focal length range	- mm
Lamp power	430 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	3000 h
Full HD	No
Supported video modes	480i, 480p, 576i, 720p, 1080i, 1080p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
HDMI connector type	Full-size
Serial interface type	RS-232
USB 2.0 ports quantity	1
S-Video inputs quantity	0
Wi-Fi	-
Noise level	37 dB
Noise level (economic mode)	31 dB
RMS rated power	16 W
Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	White
Power source	AC
AC input voltage	110 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	600 W

Weight and Dimensions

Depth	456 mm
Width	498 mm
Height	170 mm
Weight	11100 g