Hitachi CP-X8800 User Manual

12
Setting up
Arrangement (continued)
►Place the projector in a cool place with sufcient
ventilation. The projector may shutdown automatically or may malfunction if its
internal temperature is too high.
Using a damaged projector could result in a re and an electric shock.
• Do not place the projector in direct sunlight or near hot objects such as heaters.
• Do not place the projector where the air from an air conditioner or similar unit
will blow on it directly.
• Do not place the projector on carpet, cushions or bedding.
• Do not stop up, block nor cover the projector's vent holes. Do not place
anything around the projector that could be sucked in or stuck to the projector's
intake vents.
• Do not place the projector at places that are exposed to magnetic elds, doing
so can cause the cooling fans inside the projector to malfunction.
►Avoid placing the projector in smoky, humid or dusty place. Placing the
projector in such places could cause a re, an electric shock and malfunction of
the projector.
• Do not place the projector near humidiers. Especially for an ultrasonic
humidier, chlorine and minerals contained in tap water are atomized and could
be deposited in the projector causing image degradation or other problems.
• Do not place the projector in a smoking area, kitchen, passageway or by the
window.
• Position the projector to prevent light from directly hitting the
projector's remote sensor.
• Do not place the product in a place where radio interference may be caused.
• Set the ALTITUDE of the SERVICE item in the OPTION menu correctly. It is
recommended to leave it at AUTO usually (
93). If the projector is used with a
wrong setting, it may cause damage to the projector itself or the parts inside.
• Keep heat-sensitive things away from the projector. Otherwise, they may be
damaged by the heat from the projector.
CAUTION
NOTICE
• When the temperature inside the projector rises high, it may cause the
high rotation of the fan for cooling temporarily.
NOTE

Hitachi CP-X8800 Specifications

General

Matrix size	0.79 \
Native aspect ratio	3:4
Projection distance	- m
Projection technology	3LCD
Contrast ratio (typical)	10000:1
Screen size compatibility	- \
Projector native resolution	XGA (1024x768)
Focus	Auto/Manual
Zoom capability	Yes
Focal length range	- mm
Lamp power	430 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	3000 h
Full HD	No
Supported video modes	480i, 480p, 576i, 720p, 1080i, 1080p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
HDMI connector type	Full-size
Serial interface type	RS-232
USB 2.0 ports quantity	1
S-Video inputs quantity	0
Wi-Fi	-
Noise level	37 dB
Noise level (economic mode)	31 dB
RMS rated power	16 W
Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	White
Power source	AC
AC input voltage	110 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	600 W

Weight and Dimensions

Depth	456 mm
Width	498 mm
Height	170 mm
Weight	11100 g