Hitachi CP-X8800 - Page 90

90
OPTION menu
Item Description
MY BUTTON
(continued)
ACCENTUALIZER: Turns on/off the ACCENTUALIZER dialog (

65).
HDCR: Turns on/off the HDCR dialog (

65).
STATUS MONITOR: Turns on/off the back light of status monitor
(

31).
This function is unavailable when SAVING is selected in
STANDBY MODE while the projector is in the standby mode.
SCHEDULE
■ How to setup the item
1. Use the ▲/▼/◄/► cursor buttons to select or adjust.
2. Select OK to nish the settings.
(continued on next page)
■ How to activate (DATE AND TIME / SPECIFIC DATE)
Place a check mark in the box.
Check mark
in the box
Date and rst
setup info could
be seen with the
check mark.
Item Description
DATE & TIME
Set the DATE(Year/Month/Date) and Time(24-
hour scale).
SPECIFIC DATE
Set specic date from 1 to 10.
PROGRAM EDIT
The TIME and EVENT for Program 1 to 16
can be editted.
Please refer to the actual on-screen display(OSD) for
appropriate operation.
NOTE
1/2 page (Set the DATE(Year/Month/Date) and Time(24-hour scale).)