EasyManua.ls Logo

Hitachi g600 - SFF Rear Panel

Hitachi g600
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Number Item Description
1
ACT LED Green: Normal operation.
Blink green: Driv
e is being
accessed.
2
ALM LED
Red: drive stopped due to a
failure and can be replaced.
3
POWER, READY, LOCATE LEDs See the previous table.
4
Small form factor drives There are 24 2.5-inch small
form factor drives oriented
vertically. Slots are designated
0-23 (left to right).
SFF rear panel
Number Item Description
1
ENC
N/A
2
POWER LED Green: ENC is in the power-on
state.
3
LOCATE
LED
This LED indicates the
location of the chassis.
The LED can be lit or turned
off by the maintenance
utility.
4
ALARM LED Red: ENC can be replaced.
5
PATH (IN) LED Blue: IN side port is linked up.
6
PATH (IN) connector Connect to a controller or drive
tray.
7
PATH (OUT)LED Blue: OUT side port is linked
up.
8
PATH (OUT) connector Connect to a drive tray.
9
Console This port is reserved.
10
Power supply unit
N/A
Hardware description 37
Hitachi Virtual Storage Platform G400, G600 Hardware Reference Guide

Table of Contents

Other manuals for Hitachi g600

Related product manuals