• One port connects to the user's IP network.
•
One port connects to a user-supplied management console PC.
Three of the four RJ-45 ports (the ones that connect to the controllers and
the IP network) are configured as a bridge. The SVP can be addressed using
the default IP address 192.168.0.15.
In the unlikely event you cannot connect to the SVP using the default IP
address, use the following emergency login: http://<default SVP IP
address>/dev/storage/<model number><system serial number>/
emergency.do. For example:
Storage system model
number
Storage system serial
number
URL
8320004 456789 http://192.168.0.15/dev/
stor
age/8320004456789/
emergency.do
8340004 456789 http://192.168.0.15/dev/
storage/8340004456789/
emergency.do
8360004 456789 http://192.168.0.15/dev/
storage/8360004456789/
emergency.do
Users are responsible for adopting the appropriate security procedures with
the SVP
, including:
• Applying Windows security patches.
• Turning on automatic Windows updates or using the manual Windows
update method.
• Installing antivirus software that has been tested and approved by Hitachi.
• Installing the latest SVP firmware releases from Hitachi.
SVP front panel
The SVP front panel has LEDs, a reset button, and a power button.
Hardware description 47
Hitachi Virtual Storage Platform G400, G600 Hardware Reference Guide
To Next Page
Loading...
