Hitachi g600 - Dense intermix drive tray connection restrictions; SVP hardware specifications

Standard Specification Mark on the product Country regulation
AS/NZS CISPR
22:2009+A1
RCM Australia and New
Z
ealand
TP TC 020/2011 EAC Russia, Belarus, and
Kazakhstan
CNS 13438 BSMI Taiwan
KN22 KC Korea
KN24 KC Korea
Electronic emission
certifications
EN5522: 2010 CEmarking EU
EN5524: 2010 CEmarking EU
EN61000-3.2:2006+A1
+A2
CEmarking EU
EN61000-3.3:2008 CEmarking EU
Safety certifications UL and CSA
60950-1:2007
cTUVus USA and Canada
EN60950-1:2006+A1 TUV Germany
IEC60950-1:2005+A1 N/A All CB countries
IEC60950-1:2005+A1 S_Mark Argentina
TP TC 004/2011 EAC Russia
CNS 14336-1 BSMI Taiwan
EN60950-1:2006+A1 CEmarking EU
Radio interference
voluntary control
VCCI V-3/2013.04 VCCI Japan
Dense intermix drive tray connection restrictions
If a driv
e is inserted into a slot of a dense intermix drive tray when the
installed number of drives exceeds 240 slots per path, the drive is blocked.
SVP hardware specifications
The following table lists the hardware specifications for the physical service
processor (SVP) server.
Caution: The HDS supplied SVP serv
er is not supported in high temperature
environments. Do not operate the SVP server at temperatures of 40°C or
higher.
118 Storage system specifications
Hitachi Virtual Storage Platform G400, G600 Hardware Reference Guide