Need help?Do you have a question about the Hitachi g600 and is the answer not in the manual?
Information on safety precautions, environmental considerations, and equipment disposal.
Essential safety rules and procedures for operating and maintaining the storage system.
Specifies the target readers and their expected knowledge for this manual.
Details the specific firmware and software versions this document applies to.
Information on updates, corrections, and requirements for the product release.
Highlights modifications and new features introduced in the current document revision.
Explains typographic conventions and symbols used throughout the document.
Defines how storage capacity values (physical and logical) are calculated and presented.
Provides guidance on how to find and access additional product documentation online.
Information on how to obtain technical support and assistance from Hitachi Data Systems.
Instructions on how to submit feedback and comments on the document.
Describes the components and protocols used in block-level storage configurations.
Explains configurations supporting both file and block access methods.
Details the specifications and features of the VSP G400 model.
Details the specifications and features of the VSP G600 model.
Lists the key features and capabilities of the storage system.
Explains the system's ability to scale and add capacity over time.
Provides examples of typical G400 system setups.
Provides examples of typical G600 system setups.
Details the maximum number of drive trays that can be installed.
Details on controllers, including CBLM, front/rear panels, and their components.
Describes various interface boards like Fibre Channel and iSCSI, including LEDs and connectors.
Information on different drive tray types (SFF, LFF, FMD, Dense intermix) and their components.
Hardware specifications for the Service Processor (SVP) server.
Explanation of various system option modes and their functions for configuring the storage system.
Guidelines for proper storage of the system to prevent damage and battery degradation.
Procedures and guidelines for handling and using flash module drives (FMDs).
Step-by-step instructions for safely powering down the storage system.
Instructions for safely disconnecting and removing various types of cables from the system.
Lists the necessary roles for accessing and using different functions of the maintenance utility.
Procedure for creating new user accounts and assigning roles within the maintenance utility.
Steps to disable existing user accounts in the maintenance utility.
Procedure for deleting user accounts from the maintenance utility.
Instructions on how to back up user account information from the maintenance utility.
Steps to restore user account information using backup files in the maintenance utility.
Lists various models and components of the VSP G400 and G600 storage systems.
Information regarding essential replacement parts for maintaining system performance.
Details the physical dimensions, weight, and chassis sizes of the systems.
Provides information on power requirements, voltage, current, and consumption.
Outlines operating conditions for temperature, humidity, vibration, and altitude.
Information on the lifetime expectancy and replacement of system batteries.
Details RAID levels, configurations, parity groups, and volume sizes supported.
Technical specifications for iSCSI connectivity, ports, and protocols.
Lists the network and protocol standards that the system complies with.
Information on certifications and compliance with various electronic and safety standards.
Specifies limitations and restrictions for connecting dense intermix drive trays.
Technical details and specifications for the Service Processor (SVP) server hardware.
To Next Page
General
