Hitachi g600 - Flash Module Drive (FMD) Tray; FMD with Front Panel Bezel

Number Item Description
• This LED indicates the
location of the chassis.
•
The LED can be lit or turned
off by the maintenance
utility.
4
ALARM LED Red: ENC can be replaced.
5
PATH (IN) LED Blue: IN side port is linked up.
6
PATH (IN) connector Connect to a controller or drive
tray.
7
PATH (OUT)LED Blue: OUT side port is linked
up.
8
PATH (OUT) connector Connect to a drive tray.
9
Console This port is reserved.
10
Power supply unit
N/A
11
Receptacle Connect to the power cable
supplied with the storage
system.
12
AC IN LED Green: Normal operation.
13
ALM LED Red: Power supply unit can be
replaced.
14
RDY LED Green: Normal operation.
Flash module drive (FMD) tray
FMD with front panel bezel
Number Item Description
1
POWER LED
Green: Drive tray is powered
on.
2
READY LED
Green: Drive tray is
oper
ational.
3
LOCATE LED Amber:
40 Hardware description
Hitachi Virtual Storage Platform G400, G600 Hardware Reference Guide