Hitachi HA800 Series - Configuring Ilo Management Manager Network Service and Virtual Network Service Settings

Performing maintenance
39
• Configuration Settings
• Idle Connection Timeout Minutes
• RIBCL Enabled
• Persistent Mouse Keyboard Enabled
• Required Login for iLO RBSU
• Serial CLI Speed
• Serial CLI status
• Enabled Auth Required
• VSP DI Logging Enabled
• Web GUI Enabled
• iLO RBSU Enabled
• VSP Log Download Enabled
• iLO Functionality Required
• iLO Functionality Enabled
• Video presence Detect Override Supported
• Video presence detect override
• Physical Monitor health Status Enabled
• Remote Console Thumbnail enabled
• iLO IP during Post Enabled
• Command Shell Max Concurrent Sessions
3. Click Save Settings to save the changes.
Configuring iLO Management Manager Network Service and Virtual Network
Service Settings
Enable this feature and provide the information to send the network manager alerts.
Procedure
1. From the main Intelligent Provisioning page, click Perform Maintenance > iLO Configuration >
Management Settings > Manager Network Services.
2. Configure the following settings:
• Alert Mail Email
• Alert Mail Enabled
• Alert Mail SMTP Port
• Alert Mail SMTP Server
• Alert Mail Sender Domain