Hitachi HA800 Series - User Accounts; Configuring Ilo Account Services; Editing User Account Settings

Performing maintenance
44
• NIC Enabled
• Ping Gateway On Startup
• NIC supports IPv6
• Supports Flexible LOM
3. Click Save Settings to save your changes.
User Accounts
Configuring iLO Account Services
Procedure
1. From the main Intelligent Provisioning page, click Perform Maintenance > iLO Configuration > User
Accounts > Account Service.
2. Configure the following settings:
• Auth Failure Delay Time Seconds
• Auth Failure Logging Threshold
• Auth Failures Before Delay
• Default Password
• Default User Name
• Min Password Length
3. Click Save Settings to save the changes.
Editing User Account settings
Procedure
1. On the iLO Configuration Utility screen, click User Accounts, and then click Administer User
Accounts.
The User Accounts screen appears.
2. Select a user account.
3. Enter the user’s password. Re-enter the password to confirm it.
4. Select the appropriate permissions for the user account:
• Login Priv—Enables a user to log in to iLO.
• User Config Priv—Provides the user account with user configuration privileges.
• Virtual Power and Reset Priv—Enables a user to power-cycle or reset the host system. These
activities interrupt the system availability. A user with this privilege can diagnose the system by
using the button.