Hitachi HA800 Series - Configuring Ilo Management SNMP Settings

Performing maintenance
40
• Configuration Settings
• Federation Enabled
• Remote Syslog Enabled
• Virtual Serial Port Log
• Federation Supported
• Remote Syslog Port
• SNMP Trap Port
• Serial of Lan Logging
• XML Response Enabled
• Port and Protocol Enabled for:
◦ HTTP
◦ HTTPS
◦ IPMI
◦ KVMIP
◦ SNMP
◦ SSH
◦ Virtual Media
• SSDP
◦ Notify IPV6 Scope
◦ Notify Multicast Interval Seconds
◦ Notify TTL
◦ Port
◦ Protocol Enabled
• FQDN
• Host Name
3. Click Save Settings to save the changes.
Configuring iLO Management SNMP Settings
Procedure
1. From the main Intelligent Provisioning page, click Perform Maintenance > iLO Configuration >
Management Settings > SNMP.
2. Configure the following settings: