Hitachi HT7800 - User Manual

1
Hitachi HT7800 user guide
System overview column page 2
Control panel overview page 3
Start up / shut down routine page 4
Holder - Sample mounting page 5
Inserting and removing sample holder page 6
The process of exchanging samples page 7
Software overview page 8
How to start your imaging page 9
Adjusting image display and camera capture page 10
Camera capture parameters page 11 - 12
Save file setting page 13 -14
How to use autofocus page 15
Beam cross over page 16
Beam shift horizontal page 17
Auto multiple frames (AMF) page 18
Column mode operation page 19
Common nomenclature explained page 20
Troubleshooting page 21 - 24

Summary

System overview column

Control panel overview

Start up routine

Shut down routine

Holder - Sample mounting

Inserting and removing sample holder

The process of exchanging samples

Software overview

How to start your imaging

Adjusting image display and camera capture

Camera capture parameters (MAIN camera)

Save file setting

How to use autofocus

Beam cross over

Beam shift horizontal

AMF - Auto multiple frames

Column mode operation

Common nomenclature explained

Troubleshooting

Hitachi HT7800 Specifications

General

Electron Source	Thermionic emission
Type	Transmission Electron Microscope
Specimen Size	3 mm diameter
Camera	CCD camera
Filament Type	Tungsten
Specimen Stage	5-axis motorized stage
Image Mode	Bright Field, Dark Field
Accelerating Voltage	40 to 120 kV