Hitachi HT7800 - Control panel overview

3
Control panel overview
Turn right for
lower
magnification
Ctrl brightness
and work on
the right side of
the crossover
BH (beam horizontal)
used for aligning
beam (with X and Y)
to the center of your
screen
Wobbler is used
to adjust for
eucentric height
or focus
Focus knob,
switch above
switches
between
fine/coarse
Resets
lenses (use if
you get lost)
to go back to
start
Turns off the
filament and HV
Switch between Screen
and Main camera
Goes to live mode
Auto focus
Captures and
saves image