136
13. RELOCATION AND DISPOSAL
13.1 Relocation
To relocate the product, please contact the local HITACHI distributor/master dealer or representative office. Note in
particular that you need to replace the parts to relocate the compressor from a 50 Hz area to a 60 Hz area, or vice
versa. Otherwise, the compressor cannot be operated at the relocation site. Operating the compressor without parts
replacement may cause failure of the compressor.
13.2 Disposal
To dispose of the compressor after long use, be sure to drain lubricating oil. It is dangerous if lubricating oil leaks to the
outside for some reasons from a disposed compressor. Contact the local HITACHI distributor/master dealer or
representative office.
Note the Compressor’s Specifications below for future reference.
Model DSP- HP Hz
Compressor Serial No.
Installed on
day month year
Start-Up on
day month year
Purchased from Phone : Sales Person :
To Next Page
Loading...
