Hitachi PC-ARFG-E - 5 FUNCTION MENU; NOTE; Display the function menu; 5.1 SIMPLE TIMER SETTING

5 FUNCTION MENU
? NOTE
• Some functions cannot be set depending on the type, conguration,
and usage status of the indoor unit.
• If a function with " " is displayed, it means the function is not
supported and the setting is disabled.
• For the "Filter Cleaning" function menu display, please refer to the
Operation Manual of the indoor unit.
Display the function menu
1 Select the “Function Menu” and press “OK”. The “Function
Menu” screen is displayed.
2 Press “ ” or “ ” to select the item to set and press “OK”.
Press “ ” to return to the “Menu” screen.
If the "Menu screen" remains unchanged for approximately
10 minutes, the screen returns to the home screen.
Various settings are retained even when the power is turned off.
5.1 SIMPLE TIMER SETTING
This function is used to start or stop the unit operation at the set
time.
The timer operation contents can be set from "Not Used", "Once"
or "Everyday".
? NOTE
• If "Once" on the timer operation setting is selected, the setting content
changes automatically to "Not Used" after one timer operation.
• Do not set the same time for both ON/OFF timers.
• Scheduled operation (stop) is not possible while the remote control
is prohibited.
• When is displayed, scheduled operation (stop) is not available.
• Refer to “7.1 Adjusting date / time” to set the date and time.
Set the simple timer
1 Select “Simple Timer” on the “Function Menu” screen and
press “OK”.
When the current time has not been set yet, the “Adjusting
Date/Time” setting screen is displayed.
2 Press “ ” or “ ” to select the setting item:
“Execute” ↔ “ON Time” ↔ “OFF Time” ↔ “ ”.
EN
FUNCTION MENU
PMML0565 rev.1 - 04/2022
9