Hitachi PC-ARFG-E - 5.15 CANCEL INDIVIDUAL LOUVER SETTING; NOTE; 5.16 LOUVER OPEN;CLOSE

5.15 CANCEL INDIVIDUAL LOUVER SETTING
1 Select “Individual Louver Setting” on the “Function Menu”
and press “OK”.
2 Select “Cancel Individual Louver Setting” and press “OK”.
? NOTE
If there is one indoor unit connected with the controller, Step4 is displayed.
3 Press” ”, “ ”, “ ”, or “ ” to select the indoor unit to cancel the
louver direction, and press “OK”.
? NOTE
The indoor unit displayed on the screen ashes if an individual louver is
set.
4 Press “ ” or “ ” to select “Yes” and press “OK”. Cancel the
individual louver setting and return to Step3.
? NOTE
All the individual louver settings are cancelled.
5.16 LOUVER OPEN/CLOSE
This function can be used to fully open the air louvers of one
specic indoor unit, in order to easily identify this unit on site.
? NOTE
• This function cannot be set when the air conditioner is ON.
• This function is invalid depending on the indoor unit type. Refer to the
user manual of indoor unit for details.
1 Select “Louver Open/Close” on the “Function Menu” and
press “OK”.
2 Press “ ” or “ ” to select "Yes" and press "OK" to open/close
air outlet of indoor units.
EN
FUNCTION MENU
PMML0565 rev.1 - 04/2022
35