5.2.1 Schedule Day and Time Setting
? NOTE
• Scheduled operation (stop) is not possible when the remote control
is prohibited.
• When is displayed, scheduled operation (stop) is not available.
• Refer to “7.1 Adjusting date / time” to set the date and time.
Set schedule day and time
1 Select “Operation Schedule” on the “Function Menu” screen
and press “OK”.
• If the current time is not set, the “Adjusting Date/Time”
setting screen is displayed.
• If no schedule or holiday has been set, Step3 is displayed.
2 Press “ ” or “ ” to select “Verify Operation Schedule”, and
then press “OK”.
3 Select the day of the week (from Mon. to Sun.) to be set with
“ ” or “ ”, and press “OK”.
• (run) and (stop) is displayed on the LCD.
• To copy the setting contents of the previous day, press “ ”
and “OK” simultaneously.
4 Press” ” or “ ” to select schedule timer No.1 to No.5, and
press “ ” or “ ” to select “ON Time” ↔ “OFF Time” ↔
“Set Temp.”↔ “ ”. By pressing “ ” or “ ”, “ON / OFF Time”
and “Set Temp.” can be set.
• Press and hold " " or " " to increase or decrease easily.
• 5 different schedule timers (maximum) can be set for each
day of the week.
• Press “OK” to display the schedule time setting screen for
the next day of the week.
• Select “ ” and press “OK” to delete the settings of “ON /
OFF Time” and “Set Temp”.
• Press “ ” to return to Step 3.
The icon displayed indicates that the schedule control is
set and activated.
EN
FUNCTION MENU
PMML0565 rev.1 - 04/2022
11
To Next Page
Loading...
