Hitachi PC-ARFG-E - 5.17 VENTILATION; NOTE; 5.18 TOTAL HEAT EXCHANGER SETTING

5.17 VENTILATION
Operation Mode Action
A/C Operate the air conditioner individually.
Ventilation Operate the total heat exchanger individually.
A/C + Ventilation
Operate the air conditioner and the total heat
exchanger together.
? NOTE
This function is available only when the total heat exchanger is connected.
1 Select “Ventilation" on the “Function Menu” and press “OK”.
2 Press “ " or " " to select the operation mode and press
“OK” to conrm. The item changes as follows: “A/C” ↔
“Ventilation” ↔ “A/C + Ventilation”.
Press " " to return to Function Menu.
5.18 TOTAL HEAT EXCHANGER SETTING
This function is used to change the ventilation mode
(Venti. Mode) of the total heat exchanger.
? NOTE
• This function is available only when the total heat exchanger is
connected.
• This function cannot be set when the air conditioner is ON.
1 Select “Total Heat Exchanger SET” on the “Function Menu”
and press “OK”.
FUNCTION MENU
PMML0565 rev.1 - 04/2022
36