Hitachi PC-ARFG-E - 5.13.5 FrostWash Setting

5.13.5 FrostWash Setting
1 In order to access FrostWash settings, select “FrostWash
Setting” in Function Menu, and press “OK”.
2 Press “OK”.

Manual FrostWash
? NOTE
• The icon disappears when performing Manual FrostWash or when
enabling the Auto-FrostWash.
• Manual FrostWash may not be performed when the unit is used
continuously in fan mode, despite the display of the icon. After
operating the unit in cooling, heating or dry mode, manual FrostWash
can be performed.
This function is to perform FrostWash at your favourite timing,
such as when you have not used Cooling or another mode for a
while.
1 Press “ " or " " to select "FrostWash Started" and press
"OK".
2 Press ” ”, or “ ” to select “Yes” and press “OK”. Manual
FrostWash is started.
FUNCTION MENU
PMML0565 rev.1 - 04/2022
30