Hitachi PJ-TX200 User Manual (English)

Other manuals for Hitachi PJ-TX200

Questions and Answers:

M
Mathew SmithAug 15, 2025
What to do if my Hitachi PJ-TX200 says 'CHECK THE AIR FLOW'?
- R
  Rodney MooreAug 15, 2025
  If the Hitachi Projector displays 'CHECK THE AIR FLOW,' it indicates that the internal temperature is high. Turn off the projector and allow it to cool down for at least 20 minutes. Then, check for any blockage of the air passage, ensure the air filter is clean, and verify that the surrounding temperature does not exceed 35°C. If the problem persists, set the FAN SPEED in the SERVICE menu to HIGH.
J
John HullAug 18, 2025
What to do if Hitachi Projector displays 'CHECK THE AIR FLOW'?
- L
  loriwillisAug 18, 2025
  If your Hitachi Projector displays the message 'CHECK THE AIR FLOW', it indicates that the internal temperature is high. Turn off the power and let the projector cool down for at least 20 minutes. Then, check: * Is the air passage aperture blocked? * Is the air filter dirty? * Does the surrounding temperature exceed 35°C? If the issue persists, set the FAN SPEED in the SERVICE item of the OPTION menu to HIGH.
R
Robin CurtisAug 21, 2025
What to do if Hitachi PJ-TX200 shows 'REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK'?
- S
  Stephanie Mason DDSAug 22, 2025
  If your Hitachi Projector displays 'REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK. FILTER MAINTENANCE IS ESSENTIAL TO REMOVE WARNING MESSAGE, RESET FILTER TIMER', immediately turn the power off. Clean or change the air filter. After cleaning or changing the filter, reset the FILTER TIME.
C
Christina SummersAug 25, 2025
What to do if my Hitachi Projector says 'FILTER MAINTENANCE IS ESSENTIAL'?
- L
  lrodriguezAug 25, 2025
  If your Hitachi Projector displays the message 'FILTER MAINTENANCE IS ESSENTIAL TO REMOVE WARNING MESSAGE, RESET FILTER TIMER,' immediately turn the power off. Clean or change the air filter following the instructions provided in “Air filter”. After cleaning or changing the filter, make sure to reset the FILTER TIME.
R
Ross WrightAug 27, 2025
What to do if my Hitachi Projector says 'No input is detected'?
- D
  David TaylorAug 27, 2025
  If your Hitachi Projector displays 'NO INPUT IS DETECTED,' confirm the input signal connection and the status of the signal source.
C
crystal45Aug 30, 2025
Why does my Hitachi PJ-TX200 Projector say 'Sync is out of range'?
- W
  williamscourtneyAug 31, 2025
  If your Hitachi Projector displays 'SYNC IS OUT OF RANGE,' confirm the specifications for both the projector and the signal source.
K
kgrantSep 2, 2025
What to do if Hitachi PJ-TX200 Projector displays 'SYNC IS OUT OF RANGE'?
- L
  ljordanSep 2, 2025
  If your Hitachi Projector displays the message 'SYNC IS OUT OF RANGE ON *** fH *****kHz fV *****Hz', please confirm the specifications for both the projector and the signal source.
C
Carlos ClarkSep 5, 2025
How to fix 'NO INPUT IS DETECTED' on Hitachi PJ-TX200?
- C
  Claudia PorterSep 5, 2025
  If your Hitachi Projector displays 'NO INPUT IS DETECTED ON ***', confirm the input signal connection and the status of the signal source.
T
Theresa HamiltonSep 8, 2025
How to fix 'no input signal' on my Hitachi PJ-TX200?
- K
  Katherine MartinezSep 8, 2025
  If your Hitachi Projector displays 'no input signal,' confirm the input signal connection and check the status of the signal source.

Hitachi PJ-TX200 Specifications

General

Lamp Life	2000 hours
Display Technology	3LCD
Brightness	2000 lumens
Resolution	1280 x 720
Inputs	Component, Composite, S-Video, VGA

Hitachi PJ-TX200 User's Manual And Operating Guide

Table of Contents

Other manuals for Hitachi PJ-TX200

Questions and Answers:

Hitachi PJ-TX200 Specifications