! "
$ #"
! "
!
!
Preparations
Connecting your devices
With a VCR/DVD player
► Turn off all devices prior to connecting them to the projector.
Attempting to connect a live device to the projector may generate extremely loud
noises or other abnormalities that may result in malfunction and/or damage to
the device and/or projector.
► Use the accessory cables or a designated cable type to make connections.
Some cables have to be used with a core. A cable that is too long may cause
picture degradation. Please consult with your dealer for more information. For
cables that have a core only at one end, connect the end with the core to the
projector.
► Make sure that devices are connected to the correct port. An incorrect
connection may result in malfunction and/or damage to the device and/or
projector.
CAUTION
• Be sure to tighten the screws on connectors to secure.
• Automatic adjustment may not function correctly with some input signals.
NOTE
To Next Page
Loading...
