6.1 Setting method
Setting PSW of the outdoor unit PCB is required for setting External input
and output setting, see on page 115, -A- and
Function setting, see on page 123, -B- (*).
N O T E
(*) In
case of 20 to 54 HP, set from the PSW in outdoor unit A (setting from the PSW in outdoor unit B and C is
valid).
1 Press PSW1 for 3 seconds when remote control switches are
OFF. The “Menu mode” will be indicated.
2 After carrying out the configuration, press PSW1 for 3 seconds
when the “Menu mode” is indicated. The display will return to
normal indication.
PSW4 (▼) PSW2 (▲)
PSW4 (▼) PSW2 (▲)
PSW1
PSW1
A
B
Menu mode
PSW1
6 Optional functions
114
SMGB0065 rev. 1 - 12/2010
To Next Page
Loading...
