Hitachi RX

●Start operation 3-7
2015.07.0712:45
M
Manual
Startup
Com=0
＝＝＝＝＝ Ink Jet Startup Confirmation ＝＝＝＝＝
The ink jet will be turned ON.
Solution To turn the ink jet ON, press <Ready>.
Ready
Cancel
With the print head cover removed, press the Startup → Ready .
● Ink is ejected from the nozzle. (The status changes from “Stop” to “Starting”.
● Operate the unit with the end of the print head remaining inside the beaker.
4
Startup
Press Start up .
Press Ready .