S10 Series SIO Driver
GP-Pro EX Device/PLC Connection Manual
21
Device Setting
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings]. Touch the
External Device you want to set from the displayed list, and touch [Device Settings].
Timeout (s)
Use an integer from 1 to 127 to enter the time (s) for which the Display waits for the
response from the External Device.
Retry
In case of no response from the External Device, use an integer from "0 to 255" to enter
how many times the Display retransmits the command.
Wait To Send (ms)
Use an integer from "0 to 255" to enter standby time (ms) for the Display from receiving
packets to transmitting next commands.
Setup Items Setup Description
Device/PLC Name
Select the External Device to set. Device name is a title of the External Device set with GP-
Pro EX. (Initial value [PLC1])
Series Dusplay the series of the External Device.
Expanded Memory
Address (HEX)
Enter the address of theexpanded memory with "00000000 to FFFFFFFF" (HEX).
Setup Items Setup Description
To Next Page
Loading...
Need help?
General
