Hitachi SJ100 Series - Page 21

20
C_14 Terminal [4] active
state
• 00 Normally
open [NO]
01 Normally
closed [NC]
00 / 01 / 00
C_15 Terminal [5] active
state
00
C_16 Terminal [6] active
state
00
C_21 Terminal [11] function Six option
codes available
(see page 22)
01
C_22 Terminal [12] function 00
C_24 Alarm relay terminal
function
05
C_23 [FM] signal selection Three option
codes available
(see page 23)
00
C_31 Terminal [11] active
state (–FU)
• 00 Normally
open (NO)
• 01 Normally
closed (NC)
— / 00 / —
Reserved (–FE / –FR) 00 / — / 00
C_32 Terminal [12] active
state (–FU)
— / 00 / —
Terminal [11] active
state (–FE / –FR)
00 / — / 00
C_33 Alarm relay terminal
active state
01
C_41 Overload level setting Rated
current of
inverter
C_42 Frequency arrival setting for accel 0.0
C_43 Arrival frequency setting for decel 0.0
C_44 PID deviation level setting 3.0
C_81 O input span calibration Factory
calibrated
C_82 OI input span calibration
C_91 Debug mode enable
• 00 Display • 01 No display
00
C_92 Core monitor address (reserved) 0000
C_93 Core monitor date (reserved) —
C_94 Core set address (reserved) D001
C_95 Core set date (reserved) 00
Func.
Code
Name / Description
Default
Value
–FE / –FU /
–FR
Set
Value