Hitachi SJ100 Series - Determination of Wire and Fuse Sizes

10-2. I/O board compatibility
V: available - : not available
I/O
board
Name “R
evision
”
002NFE-022NFE 037LFE 004HFE-040HFE 002NFR-022NFU 037LFU 004HFU-040HFU 055HFE,075HFE 055LFU,075LFU 055HFU,075HFU 002LFR-037LFR 004HFR-037HFR 055LFR,075LFR 055HFR,075HFR
SJ100EUL "C","D","H" V - - - -
SJ100EUL "E","F","G","H" - V - - -
SJ100075EUL "A" - - V - -
SJ100L "C","D","H" - - - V -
SJ100075L "A" - - - - V
Note;
"SJ100xxxEUx" ; "SOURCE type" on the control terminal(different from SINK).
"SJ100xxxL" ; "SINK type" on the control terminal.(different from SOURCE)
kW setup is not necessary such as J100 , J300 series for I/O board if I/O board was replaced.
There is no compatibility between L100 series and SJ100 series.
10-13