Hitachi SJ300 Series

33
P018 Home search completion delay time setting 0.00
P019 Electronic gear set position selection
• 00 Position feedback side
• 01 Position command side
00
P020 Electronic gear ratio numerator setting 1.
P021 Electronic gear ratio denominator setting 1.
P022 Feed-forward gain setting 0.00
P023 Position loop gain setting 0.50
P025 Temp. compensation thermistor enable
• 00 Disable • 01 Enable
00
P026 Over-speed error detection level setting 135.0
P027 Speed deviation error detection level setting 7.50
P031 Accel/decel time input selection
•00Inverter
• 01 Expansion card #1
• 02 Expansion card #2
00
P032 Positioning command input selection
•00Inverter
• 01 Expansion card #1
• 02 Expansion card #2
00
P044 DeviceNet comm watchdog timer 1.00
P045 Inverter action on DeviceNet comm error
•00Trip
• 01 Decelerate and trip
• 02 Hold last speed
• 03 Free run stop
• 04 Decelerate and stop
01
P046 DeviceNet polled I/O: Output instance number 21
P047 DeviceNet polled I/O: Input instance number 71
P048 Inverter action on DeviceNet idle mode
•00Trip
• 01 Decelerate and trip
• 02 Hold last speed
• 03 Free run stop
• 04 Decelerate and stop
01
P049 DeviceNet motor poles setting for RPM 0
Func.
Code
Name / Description
Default
Val ue
–FE/FU/FR
Set
Val ue