2 Features and benets
Eco-Desing and Seasonal Efciency
TCGB0136 rev.1 - 05/2021
20
Seasonal Energy Efciency Ratio (SEER) in cooling and the Seasonal Coefcient of Performance (SCOP) in
heating give a more accurate estimation of the real performance of the equipment during the whole period of usage, all
while considering:
• Several points of measure (In cooling mode: an outside temperature of 20ºC, 25ºC, 30ºC and 35ºC; in heating mode:
an outside temperature of +12ºC, +7ºC, +2ºC, and -7ºC.
• Different compressor speeds (full load and partial load), auxiliary consumption (crankcase heaters, thermostat off
mode, OFF mode…).
• Conditions of temperature (number of hours per outdoor temperature) for an identied climate (average climate for
ErP compliance)
• Building heat load (called Pdesign)
Hitachi, in compliance with the Eco Design Directive, has developed the new outdoor units: new UTOPIA series, whose
high efciency level (including SEER and SCOP values) is properly informed to our customers to allow for an easy
selection.
New UTOPIA series offer high seasonal efciencies, as well as complete exibility, with all outdoor units from both ranges
being fully compatible with the System Free range of indoor units. Hitachi’s UTOPIA technology has all the benets of
VRF, including individual control of each indoor unit with an increased number of indoor unit combinations in addition to
delivering excellent part-load efciency.
With cooling capacities and heating capacities from 2HP to 12HP, a maximum of 4 indoor units are connectable
to a single outdoor unit, with individual control and efciencies achieved as high as A++/A+ (depending on model/
combinations).
2.2.3 Energy classes and energy label (Lot 10)
The energy efciency classes from A+++ to D are introduced based on SCOP and SEER values: The scale for energy
labelling is:
A+++
A++
D
C
B
A
A+
E
F
G SCOP < 1,90
1,90SCOP< 2,20≤
2,20SCOP< 2,50≤
2,50SCOP< 2,80≤
2,80SCOP< 3,10≤
3,10SCOP< 3,40≤
3,40SCOP< 4,00≤
4,00SCOP< 4,60≤
4,60SCOP< 5,10≤
SCOP 5,10≥
5,60SEER < 6,10≤
6,10SEER < 8,50≤
SEER 8,50≥
5,10SEER < 5,60≤
4,60SEER < 5,10≤
4,10SEER < 4,60≤
3,60SEER < 4,10≤
3,10SEER < 3,60≤
2,60SEER < 3,10≤
SEER < 2,60
The Energy label is the regulation compliant way of displaying product efciency and sound level to any point of sales.
This label displays 3 European climates: average climate (green), cold climate (blue), hot climate (orange). Regulation
requirement is to display any information related to performances on average climate.
Climate used on ErP Temperature used for product selection
Average -10°C
Cold -22°C
Hot +2