Hitachi Virtual Storage Platform G130 - Page 30

Number Item Color Pattern Description
1 ACT LED Green ON Normal operation.
Blink Drive is being accessed.
2 ALM LED Red ON Drive stopped due to a failure and can be
replaced.
3 POWER,
READY,
WARNING,
and
ALARM
LEDs
- - Refer to the previous table.
Note: When System Option Mode 1097 is
set to ON, the WARNING LED does not
blink, even if the following failure service
information messages (SIM) are issued:
452xxx, 462xxx, 3077xx, 4100xx, and
410100.
4 POWER
ON/OFF
(main
switch)
- - Turns on power to the storage system.
5 Large
form-
factor
drive slots
- - Twelve 3.5-inch large form-factor drives
are positioned horizontally in the slots.
The slots are organized from 0 to 11 in the
following order:
8 9 10 11
4 5 6 7
0 1 2 3
The following table describes the denitions of the CBSL controller real panel LEDs.
Controller chassis with large form-factor drive bays (CBSL)
Chapter 2: Hardware components and specications
Hitachi Virtual Storage Platform G130 Hardware Reference Guide 30