4. Close the command pr
ompt.
Viewing the Windows event log
You can view the Windows event log which is output to the SVP.
Procedure
1. From the Windows start menu, click Control Panel > System and Security >
Administrative Tools > Event Viewer.
2. Click Windows Logs > Application in the left pane.
Output example of the failure information
The stor
age system delivers a report after you send failure information to the event log.
The storage system failure information will look similar to the following example:
Viewing the Windows event log
Chapter 6: Alert
notications
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 184
To Next Page
Loading...
