Item Description
Number of PGs The number of the parity groups that the disk board controls.
â–
If "DKB" is "External", this item indicates the number of parity gr
oups
mapped to external volumes.
â–
If "DKB" is "External (FICON DM)", this item indicates the number of
parity groups mapped to volumes for FICON DM.
Number of LDEVs (Total) The number of the logical volumes belonging to the parity groups that the
disk board controls.
Number of LDEVs
(Unallocated)
The number of the logical volumes that are inaccessible from the host and
belong to the parity groups controlled by the disk board.
Total LDEV Capacity (MB) Total capacity of the logical volumes belonging to the parity groups that the
disk board controls.
Unallocated LDEV
Capacity (MB)
Total capacity of the logical volumes that are inaccessible from the host
and belong to the parity groups controlled by the disk board.
Host Groups / iSCSI Targets report
The following î ´gure shows an example of a Host Groups / iSCSI Targets report. The table
follo
wing the î ´gure describes the items in the report.
Item Description
Port Location Name of the port
Type Type of the host group
Host Group Name / iSCSI
T
arget Alias
Name of the host group / alias of the iSCSI target
Host Group ID / iSCSI
Target ID
Number of the host group / ID of the iSCSI target
Host Groups / iSCSI Targets report
Appendix A: Examples of storage
conî ´guration reports
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 209
To Next Page
Loading...
Need help?
General