Hitachi Virtual Storage Platform G600 - Page 266

Item Content
Setting MPU Number of the MP unit congured to control LDEV.
(MPU-10, MPU-11, MPU-20, MPU-21)
Allocated Information about whether this LDEV is allocated to a host.
■
"
Y" is output for volumes accessible to the host.
Pool Name The pool's name
1
■
If the pr
ovisioning type is Dynamic Provisioning, the name of the pool
related to the logical volume is displayed.
■
If the attribute is Pool, the name of the pool where the logical volume
belongs is displayed.
■
When neither of the above are displayed, the pool name is blank.
CmdDevSecurity Indicates whether Security is specied as the attribute for the command
device.
■
Enabled: Command device security setting is set.
■
Disabled: Command device security setting is not set.
■
Blank: "LDEV Attribute" is not CMDDEV.
CmdDevUserAuth Indicates whether User Authentication is specied as the attribute for the
command device.
■
Enabled: User authentication setting is set.
■
Disabled: User authentication setting is not set.
■
Blank: "LDEV Attribute" is not CMDDEV.
CmdDevDevGrpDef Indicates whether Device Group Denition is specied as the attribute for
the command device.
■
Enabled: Device group denition setting is set.
■
Disabled: Device group denition setting is not set.
■
Blank: "LDEV Attribute" is not CMDDEV.
Resource Group ID
(LDEV)
LDEV resource group ID (number in the decimal format)
Resource Group Name
(LDEV)
LDEV resource group name (0 to 1,023, decimal)
Encryption Indicates whether the parity group identied by ECC Group is encrypted.
■
For internal volumes: Enabled (encrypted) or Disabled (not encrypted)
■
For external volumes: blank
LdevInfo.csv
Appendix A: Examples of storage conguration reports
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 266