Getting Started
4. After setting the AM/PM, press the DATE/TITLE button. The display changes and the
internal clock starts.
6:30 AM
11/ 5/1997
Note: After the date and time are set, " AUTO" appears and the camcorder enters the
automatic date recording mode. See "Date Recording" on page 32.
Correcting the Date and Time
1. Press the DATE/TITLE button while pressing the STOP button. The flashing cursor
appears at the month.
2. Move to where you need to make the correction with the STOP button and use the
F.F and REW to correct.
3. Press the DATE/TITLE button to set the corrected date and time.
To Next Page
Loading...
Need help?
General
