Note: On the NAS system, local users and Active Directory groups can be
created with read-only access. A read-only user has permission to view most
pages of the NAS Manager; however, they are not generally allowed to
perform any actions on the NAS Manager that would trigger a system or
configuration change
Procedure
1. Navigate to Home > SMU Administrator to display the Active
Directory Servers page.
2. Enter the Base Distinguished Name.
This name must be entered in LDAP distinguished name (DN) format
which consists of a sequence of "attribute=value" pairs separated by
comma or semi-colon. The Base Distinguished Name should contain the
domain component (dc) attributes for the organization's domain. So for
the domain example.com it would be "dc=example, dc=com". The name
may also contain organization unit (ou) attributes.
The following table describes the fields on this page:
Field/Item
Description
Connection settings
Base Distinguished Name The LDAP root location for users and groups. The name is
recommended to contain just the domain components.
Use TLS to secure Active
Directory connections
Uses encrypted LDAP communications for Active Directory
authentication by default. Uncheck this option to use non-
Setting up security 231
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
