Starting from Hitachi Command Suite
Procedure
1. Start Hitachi Command Suite.
2. In the Hitachi Command Suite main window, click the Resources tab,
and then click Storage Systems from the tree view.
3. Expand the tree, and then right-click a storage system and click Other
Functions.
4. In Hitachi Device Manager - Storage Navigator, click the Maintenance
Utility menu, and then click Hardware to start the maintenance utility.
Starting from Hitachi Device Manager - Storage Navigator
Procedure
1. Launch a web browser from the console PC connected to the SVP, and
then start Device Manager - Storage Navigator.
2. Enter the following URL in the address field of your browser, and then
press Enter: http://[IP address of SVP]/module/sn2/0/index.do
3. In the Storage Device List window, click the picture of the registered
storage system.
4. Log in to Device Manager - Storage Navigator.
5. On the Maintenance Utility menu, click Hardware.
58 Preparing your management software
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
