3. Enter the following information from the configuration of the switch you
are adding:
• Virtual Fabric ID: For Cisco switches, the VSAN ID. Not applicable to
Brocade switches.
• Fabric Switch Type: Select Brocade or Cisco.
• Fabric Switch IP Address
To add or update a core switch, use the Management IP address of the
switch or the Active CP IP address.
• Port Number
• Username
• Password
4. Click Submit.
Result
A job is created to add the fabric switch.
Adding servers
Add servers so you can attach volumes. You can add multiple server
parameters from a file, or add one server at a time.
There are two methods of adding servers:
• Manually add information for one server at a time.
• Import a CSV (comma-separated values) file with information for one
server in each row.
The CSV file must have the following headings, in the order specified:
Name, Description, IPAddress, OSType, WWNs (comma separated list of
WWNs). All fields are required except Description and IPAddress. Valid
OSType values are as follows:
• AIX
• HP_UX
• LINUX
• NETWARE
• OVMS
• SOLARIS
• TRU64
• VMWARE
• VMWARE_EX
• WIN
• WIN_EX
Procedure
1. On the Storage Advisor dashboard, click Servers. Then click the plus
sign (+) to open the Add Server page.
2. On the Add Server page, do one of the following:
54 Preparing your management software
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
