Item Description
IPv6 : Global Address 2
IPv6 global address 2 of the port.
Output example: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (hexadecimal)
IPv6 : Assigned Default
Gateway
Assigned IPv6 default gateway
Selective ACK Selective ACK mode
• Enabled
• Disabled
Ethernet MTU Size (Byte) MTU settings (binary)
• 1,500
Keep Alive Timer iSCSI keep alive timer (0 to 64,800) (sec)
VLAN : Tagging Mode Tagging mode of VLAN
• Enabled
• Disabled
VLAN : ID Number of VLAN set to the port (1 to 4,094)
CHAP User Name User name for the CHAP authentication
iSNS Server : Mode iSNS mode settings
• ON
• OFF
iSNS Server : IP Address IP address of the iSNS server (30 to 65,535)
iSNS Server : TCP Port
Number
Number of the TCP port used in iSNS (binary)
Address (Loop ID) Fibre port address and Loop ID of the port
Port Security Security of the port
• Enabled
• Disabled
Speed Data transfer speed of the port
SFP Data Transfer Rate Maximum transfer rate of SFP which the mounted package supports.
• 8G
• 10G
• 16G
• 32G
• A hyphen (-) is displayed if Type is 10iSCSI2c (CHB) or NAS module (CHB).
T10 PI Mode Indicates whether the T10 PI mode can be applied to the port.
• Enabled
• Disabled
• Blank if the port type is a Fibre port other than 16FC2(CHB). For iSCSI ports, a
hyphen (-) is displayed.
Resource Group Name Name of the resource group to which the port belongs
Resource Group ID ID for the resource group to which the port belongs (0 to 1023)
Number of Hosts The number of the hosts registered to the port
Number of LUNs The number of the LU paths defined to the port
Number of LDEVs The number of the logical volumes that can be accessed through the port
294 Examples of storage configuration reports
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
To Next Page
Loading...
