Hitachi YUTAKI Series - System Configuration

8.6.2 SYSTEM CONFIGURATION
In system conguration menu it is possible to congure all the system settings.
Space Heating / Cooling conguration:
• Circuit 1
• Circuit 2
DHW conguration:
• Status
• Mode
• Control
• Setting temperature
• HP control
• HP control setting
• Maximum setting temperature
• Differential temperature
• HP OFF differential temperature
• HP ON differential temperature
• Maximum time
• Cycle Time
• Space Priority status
• Space Priority temperature
• DHW Heater
• Anti Legionella
General conguration:
• Holiday Mode
• Air Eco Offset
• Room Thermostats
• Central Operation
Timer and schedule conguration:
• Circuit 1
• Circuit 2
• DHW
• Swimming Pool
• Delete all timers conguration
Cascade conguration:
• Supply setting offset
• Modules conguration
Swimming Pool conguration:
• Status
• Setting temperature
• Offset temperature
1 / 2
Optional functions conguration:
• System
• Space functions
• DHW
• Emergency Operation
I/O and Sensor conguration:
• Inputs
• Outputs
• Auxiliary sensors
Complementary Heating conguration:
• Heating Source (HP Only, HP+Boiler,
HP+Heater, HP+Heater+Boiler)
• Electrical heater
• Boiler combination
• Solar combination
Heat pump conguration:
• Water Pump Conguration
• Night Shift
• Outdoor Average Timer
• Minimum ON Time
• Minimum OFF Time
• Seizure Protection
2 / 2
YUTAKI CASCADE CONTROLLER
PMML0510 rev.1 - 10/2019
126