Example 4
1- PC-ARFH1E attached into the unit and used as unit controller and room thermostat for both zones.
2- Wired room sensor for Zone 1
3- Wired room sensor for Zone 2
OK
Indoor unit
1
Living room Zone 1
Bedroom Zone 2
Order FIRST
Type
Master
Unit + Circuits
Questions Answers
Is this device attached to the unit? YES
Is this device used as a Room Thermostat of a zone? YES, IN BOTH ZONES
Which are the emitters of circuit 1? Underoor heating
Which are the emitters of circuit 2? Underoor heating
Do you have domestic hot water tank? NO
Do you have swimming pool? NO
Do you have boiler? NO
Do you have electric backup heater? NO
COMPLETED
? NOTE
• After nishing Conguration assistant, go to Input&Outputs&Sensor menu and select which auxiliary sensor do you want to use for ambient
temperature in each zone.
• Example:
REF Access Description Default Value Selected value
Auxiliary Sensors
Taux1 Sensor 1 (Taux1) Two3 (if Boiler) C1 Ambient
Taux2 Sensor 2 (Taux2) Swimming pool (if SWP existing) C2 Ambient
Taux3 Sensor 3 (Taux3) Outdoor Sensor -
UNIT CONTROLLER
PMML0510 rev.1 - 10/2019
84
To Next Page
Loading...
