OPERATING THE ENGINE
3-5
CHECK INSTRUMENTS AFTER STARTING
IMPORTANT: Prevent possible damage to engine.
If indicator lights do not go out after
starting engine, IMMEDIATELY STOP
THE ENGINE and correct the cause.
Check that
1. Check if alternator indicator (1) is OFF.
In case alternator indicator (1) stays ON, immediately
stop the engine. Check the alternator and battery cir-
cuits for any abnormality.
2. Check if engine oil pressure indicator (2) is OFF.
In case engine oil pressure indicator (2) stays ON,
immediately stop the engine. Check the engine oil
pressure system and the oil level for any abnormality.
3. Engine noise and exhaust gas are normal.
IMPORTANT: Operate machine at less-than-normal
loads and speeds until engine is at nor-
mal operating temperature.
M1CC-01-100
2
1
To Next Page
Loading...
Need help?
General
