User Manual Cleaning, Inspection and Maintenance
EM1 Series AC Servo Motors EM1-01-0-EN-2110-MA Page 57 of 72
10 Cleaning, Inspection and Maintenance
10.1 Tools and Equipment
Tools or Equipment
Operating Phase Tools or Equipment
Cleaning
Notification board
Rag
70 % alcohol
Maintenance
Notification board
Screwdriver or torque wrench
Lubricant
Insulation resistance meter
Personal Protective Equipment
Operating Phase Personal protective equipment
Cleaning
When cleaning the AC servo motor systems, the
following personal protective equipment is required:
Safety shoes
Protective helmet
Protective gloves
Protective goggles
Maintenance When carrying out maintenance and repairs, the
following personal protective equipment is required:
Safety shoes
Protective helmet
Protective gloves
10.2 Maintenance and Cleaning
Please read all safety instructions before performing motor maintenance.
Danger! Danger from Electrical Voltage!
Work may only be carried out by a qualified electrician and with the power supply
disconnected!
Before carrying out work on the servo motor system, you must disconnect the power
supply and protect it from being switched back on!
Danger! Danger from Strong Magnetic Fields!
Strong magnetic fields around servo motor systems pose a health risk to persons with
implants (e.g. cardiac pacemakers) that are affected by magnetic fields.
Persons with implants that are affected by magnetic fields should maintain a safe distance
of at least 1 m from servo motor systems.
Danger! Risk of Crushing from Strong Forces of Attraction!
The shaft and magnetizable objects may accidentally attract each other and collide!
Do not underestimate the attraction force and operate carefully.
Wear safety gloves when necessary.
At least two people are required to cooperate during operation.
To Next Page
Loading...
Need help?
General
