HKC HQ-005 - 4.9.5. PCU Deadband Setting; 4.9.6. PCU Deadtime Setting

Installation, Operation and Maintenance Manual
HQ-005 Electric Actuator
Document No. HKQI-611
11 | P a g e
! Optional Equipment(s)
1) Potentiometer Current Position Transmitter
 Check the resistance value
 Check potentiometer gear for jamming
 Check ZERO and SPAN calibration
 Check the board for any damage
2) PCU – Positioner card
 Verify the input signal
 Check the configuration of the dip switches
 Check the board for any damage